Application

2000-2026 All Acura Models. All Part numbers

What you need to know (please read before ordering)

This is a Repair Service of your existing ABS hydraulic block. You will need to remove the ABS assembly (module, block & pump), and send it to us for repair using the shipping labels provided to you.

The order will be processed during our regular business hours (Mon-Fri 8:30 – 5:00 EST). After processing your order, we will email shipping labels and shipping instructions. If you don’t see shipping labels within 1 hour of submitting your order (during business hours) please first check your junk/spam folders. If you still don’t see the labels, please contact us at 1-888-712-2525

Important: To prevent damage during shipping, always ship the hydraulic block & pump with the ABS module attached.

Features:

Plug & Play: The software and settings will not be modified, making this module plug and play. No software reload or calibration is required after installation.

Quick Turnaround: Your module will be tested, repaired, tested again, and sent back to you in 2-3 business days (unless otherwise noted).

Quality Tested: All our ABS hydraulic blocks undergo rigorous tests on our specialized custom-built test bed. For more information check out our blog post here.

2 Year Limited Warranty: This module comes with our 2 Year Limited Warranty. Please see here for more information.

Common Failure Symptoms

• The brake pedal goes to the floor
• Soft, spongy brake pedal
• Brake cannot be bled. Brake fluid doesn’t flow out of one of the calipers
• Brakes are stuck in the applied position. The vehicle cannot be moved
• Overheating, partially applied brakes
• Vehicle pulls to one side when braking
  
  Please note the brake pressure sensor is an integral part of the hydraulic block. It is not replaceable or repairable. As such, brake pressure sensor failure codes are not repairable. Contact us for options.

How this service works

Step 1: Purchase our service online or over the phone.
Step 2: After processing your order, we will email you pre-paid shipping labels.
Step 3: Send us your old defective unit by dropping off the package to any UPS location, or call UPS to schedule a pick up.
Step 4: We will inspect and repair your old module.
Step 5: We will send you back the repaired module the same day (unless otherwise stated).
Step 6: You install the unit back into your vehicle.

For more detailed instructions, please see here.

Tech Tips

1 – We strongly recommend using DOT4 brake fluid instead of DOT3. Aside from the higher boiling point, DOT4 brake fluid degrades at a much slower rate, and is less corrosive to the 12 sensitive zinc-plated valves and springs inside the ABS hydraulic block.

2 – Brake fluid should be flushed every 2 years (or 24,000 miles). Follow the manufacturer’s flushing procedure.

3 – Valve caps are sensitive to damage. Take care when handling the ABS block. The valve protecting caps can be easily damaged as they are made from very thin stainless steel. Even a tiny dent will restrict the needle valve movement inside. Because of this, it’s important to always ship the ABS hydraulic block with the module attached to it.

Check out our blog here for more information.

FAQ

Can all types of failures be fixed?

We strive to achieve a 100% repair success rate, but the reality is some modules are damaged beyond repair. Water and fire-damaged units are very difficult to repair. In these cases we may options to replace the hardware. If it is not possible, we’ll refund the repair service less a $75 bench test fee.

How we test your ABS Module