Applications

What you need to know (please read before ordering)

This is a Repair Service of your existing module. You will need to remove and send your module to us for repair using the shipping labels provided to you.

The order will be processed during our regular business hours (Mon-Fri 8:30 – 5:00 EST). After processing your order, we will email shipping labels and shipping instructions. If you do not see shipping labels within 1 hour of submitting your order (during business hours) please first check your junk/spam folders. If you still do not see the labels, please contact us at 1-888-712-2525

Important: This repair is limited to injector related failures and the following DTCs:

P0201: Injector Circuit Malfunction – Cylinder 1
P0202: Injector Circuit Malfunction – Cylinder 2
P0203: Injector Circuit Malfunction – Cylinder 3
P0204: Injector Circuit Malfunction – Cylinder 4
P0300: Random or Multiple Misfires Detected
P0245: Charge Air Control Valve Short or Open

Repairs of any other failures may be performed, but additional time and cost may be required.

Features:

Plug & Play: The software and settings will not be modified, making this module plug and play. No software reload, coding or calibration is required after installation.

Quick Turnaround: Your module will be tested, repaired, tested again, and sent back to you in the same day (unless otherwise noted).

Completely Reworked PCB: All internal circuit boards are tested at the component level. Any known prone-to-failure parts that are close to the maximum tolerance are automatically replaced.

Lifetime Limited Warranty: This module comes with our Lifetime Limited Warranty. Please see here for more information.

Reference Numbers

12800388 | 12804813 | 32019553 | 32019554 | 32019555 | 32019556 | 32020033 | 32020034 | 32020053 | 32020055 | 32020122 | 55353231 | 55567903 | 55571182

Common Failure Symptoms

Our ECM Repair service is limited to the injector related failures and charge air control valve the following diagnostic trouble codes:

• P0201 – Injector circuit open. Cylinder 1.
• P0202 – Injector circuit open. Cylinder 2.
• P0203 – Injector circuit open. Cylinder 3.
• P0204 – Injector circuit open. Cylinder 4.
• P0300 – Random misfire.
• Injectors stuck open causing engine flooding.
• P0245 – Charge air control valve. Short or open.

How This Service Works

Step 1: Purchase our service online or over the phone.
Step 2: After processing your order, we will email you pre-paid shipping labels.
Step 3: Send us your old defective unit by dropping off the package to any UPS location or call UPS to schedule a pick-up.
Step 4: We will inspect and repair your old module.
Step 5: We will send you back the repaired module the same day (unless otherwise stated).
Step 6: You install the unit back into your vehicle.

For more detailed instructions, please see here.