Application

What you need to know (please read before ordering)

Important: For testing purposes, we will need at least one key to be sent to us along with the CEM.

Important: Since these CEMs have many different part numbers, it’s recommended to contact us with your CEM’s hardware part number so we can make sure we have a unit to transfer onto.

Important: If your vehicle isn’t starting whether permanently or intermittently, we require your CEM, ECM, BCM and at least one key. When ordering, please tell us that you’ll be sending in the additional modules so we can make sure the shipping labels properly list everything.

This is a Program Transfer service of your existing module. You will need to remove and send your module to us using the shipping labels provided to you. We will extract the software from your defective unit and program it into one of our remanufactured units. Only the good unit will be shipped back to you. The original module is recycled here at our facility.

The order will be processed during our regular business hours (Mon-Fri 8:30 – 5:30 EST). After processing your order, we will email shipping labels and shipping instructions. If you don’t see shipping labels within 1 hour of submitting your order (during business hours) please first check your junk/spam folders. If you still don’t see the labels, please contact us at 1-888-712-2525

Features:

Plug & Play: The programming from the original unit is moved over to the good unit one for one, which means the module sent back to you is plug and play. No software reload or calibration is required. Please note in some very rare cases of software corruption there may be need for a software reload. We see this in less than 1 percent of all modules sent in.

Quick Turnaround: Your module will be tested, repaired, tested again, and sent back to you within 1 or 2 days (unless otherwise noted).

24 Month Limited Warranty: This module comes with our 24 Month Limited Warranty. Please see here for more information. Please see here for more information

Reference Numbers

8690719 | 8690720 | 30728906 | 30765015 | 31254317 | 31327215 | 3125903 | 31254749

Common Failure Symptoms

P1 Platform CEMs control the majority of the vehicle’s functions, including:

• Interior and exterior lighting
• Front and rear wipers and washers
• Sunroof
• Seat belts
• Seat heaters
• Alarm system
• Accelerator pedal
• Fuel pump
• Fuel level sensor
• Blower fan

The CEM is also responsible for supplying power to the majority of other modules including:

• Supplemental Restraint System (SRS) Module
• Engine Control Module (ECM)
• Transmission Control Module (TCM)
• Integrated Audio Module (IAM)
• Infotainment Control Module (ICM)
• Audio Module (AUD)
• Etc.

The CEM is a Central Gateway to the vehicle’s CAN and LIN networks. Any one of these circuits can fail, so it is very important that you are very specific about the failure description when filling out the failure report.

How This Service Works

Step 1: Purchase our program transfer service online or over the phone.
Step 2: After processing your order, we will email you pre-paid shipping labels.
Step 3: Send us your old defective unit by dropping off the package to any UPS location, or call UPS to schedule a pick up.
Step 4: We will extract the software from the old defective unit, and program our remanufactured unit with the extracted software.
Step 5: We will send you back the working module the same day (unless otherwise stated).
Step 6: You install the unit back into your vehicle.

For more detailed instructions, please see here.