Application

What you need to know (please read before ordering)

Please Note: Along with the ABS Module, we will also need the attached hydraulic block and pump for proper testing.

Important: When shipping your ABS Module and Pump please ensure you package it properly. Place the module and pump together in a thick plastic bag to prevent fluid from leaking into the packaging. If the fluid leaks and saturates the box, this will cause the box to break and could cause delays or even possible loss of the module when shipping into our facility. Because the part is heavy, we recommend packaging with lots of protection (bubble wrap, packaging peanuts, etc) to avoid any movement in the box. Not following these instructions could result in additional fees, damages, or even loss of the part. It is the sole responsibility of the shipper if any of these events occur when sending the part to XeMODeX.

This is a Repair Service for your existing module. You will need to remove and send your module to us for repair using the shipping labels provided to you.

The order will be processed during our regular business hours (Mon-Fri 8:30 – 5:00 EST). After processing your order, we will email shipping labels and shipping instructions. If you don’t see shipping labels within 1 hour of submitting your order (during business hours) please first check your junk/spam folders. If you still don’t see the labels, please contact us at 1-888-712-2525

Features:

Plug & Play: The software and settings will not be modified, making this module plug and play. No software reload or calibration is required after installation.

Quick Turnaround: Your module will be tested, repaired, tested again, and sent back to you in the same day (unless otherwise noted).

Non-Destructive Case Opening: A special press is used to separate the plastic ABS case. The factory seams are preserved. Once reassembled the module is fully sealed. No cut or oozing silicon.

Completely Reworked PCB: All internal circuit boards are tested at the component level. Any known prone-to-failure parts that are close to the maximum tolerance are automatically replaced.

Quality Tested: All our ABS modules undergo rigorous tests on our specialized custom-built CAN-bus driven test bed. All functions, DTCs, and software are checked and verified for proper operation.

Lifetime Limited Warranty: This module comes with our Lifetime Limited Warranty. Please see here for more information.

Reference Numbers

4F0 614 517 | 4F0 614 517 AA | 4F0 614 517 AD | 0265951536 | 0265850473 | 8E0910517C | 8E0614517BB | 8E0 910 517 J | 8E0 614 517 BH | 8R0 907 379 C | 0 265 950 473 | 8E0 910 517 E | 8E0 614 517 AL | 8E0614517BH | 8E0910517J | 8E0614517BJ | 8E0614517BE | 8E0614517AM | 8E0614517AN | 8E0614517BG | 8E0614517BD | 8K0614517AL | 8E0614517BF | 420614517B | 8K0907379CA

Common Failure Symptoms

• Loss of communication
• Pump or solenoid failures
• Wheel speed sensor issues
• Brake pressure sensor codes
• Code 1418 for switch valve 1
• Code 1421 for high pressure valve 2

How This Service Works

Step 1: Purchase our repair service online or over the phone.
Step 2: After processing your order, we will email you pre-paid shipping labels.
Step 3: Send us your old defective unit by dropping off the package to any UPS location, or call UPS to schedule a pick up.
Step 4: We will inspect and repair your old module.
Step 5: We will send you back the repaired module the same day (unless otherwise stated).
Step 6: You install the unit back into your vehicle.

For more detailed instructions, please see here.