Application

What you need to know (please read before ordering)

This is a Program Transfer service of your existing module. You will need to remove and send your module to us using the shipping labels provided to you. We will extract the software from your defective unit and program it into one of our remanufactured units. Only the good unit will be shipped back to you. The original module is recycled here at our facility.

The order will be processed during our regular business hours (Mon-Fri 8:30 – 5:00 EST). After processing your order, we will email shipping labels and shipping instructions. If you don’t see shipping labels within 1 hour of submitting your order (during business hours) please first check your junk/spam folders. If you still don’t see the labels, please contact us at 1-888-712-2525

Features:

Plug & Play: The programming from the original unit is moved over to the good unit one for one, which means the module sent back to you is plug and play. No software reload or calibration is required.

Quick Turnaround: Your module will be tested, transferred, tested again, and the good unit sent back to you in the same day (unless otherwise noted).

Thermal Cooling Upgrade: All REMs have a heat-dissipating sink installed directly on the MCU. This upgrade will ensure reliable processor operation during the hot summer months.

Completely Reworked PCB: All internal circuit boards are tested at the component level. Any known prone-to-failure parts that are close to the maximum tolerance are automatically replaced.

Quality Tested: All our Volvo REMs undergo rigorous tests on our specialized custom-built CAN-bus driven testbed. All functions, DTCs, and software are checked and verified for proper operation.

Lifetime Limited Warranty: This module comes with our Lifetime Limited Warranty. Please see here for more information.

Common Failure Symptoms

• Fuel level sensor codes
• No ground to Differential Electronic Module (DEM) relay
• Loss of communication

How This Service Works

Step 1: Purchase our program transfer service online or over the phone.
Step 2: After processing your order, we will email you pre-paid shipping labels.
Step 3: Send us your old defective unit by dropping off the package to any UPS location, or call UPS to schedule a pick up.
Step 4: We will extract the software from the old defective unit, and program our remanufactured unit with the extracted software.
Step 5: We will send you back the working module the same day (unless otherwise stated), and the original unit is recycled at our facility.
Step 6: You install the unit back into your vehicle.

For more detailed instructions, please see here.

FAQ

Why don’t you send my original module back to me?
In order to extract the software, we have to do some hardware modifications to your original module. This process is irreversible and damages the module permanently. Your unit will be recycled at our facility.