Abs / Brake Control Module for Audi

Code: VA.1010. 4L0614517D.10.20-RS

Repair Service

MSRP:$2250.00 ( Save 77%)
Shipping:$119 Express
$44 Ground
Services Type:Repair Service
Turnaround Time:Same Day
XeMODeX Part Number:VA.1010.4L0614517D.10.20
Reload Required?No. Plug and Play Installation
Warranty:Lifetime Limited Warranty

XeMODeX Price:  $499.00

In Stock



2009–2011 AudiA3
2007–2012 AudiQ7
2008-2015AudiTT Quattro
2009-2015AudiTTS Quattro

What you need to know (please read before ordering)

What you need to know (please read before ordering)

Please Note: Along with the ABS Module, we will also need the attached hydraulic block and pump for proper testing.

Important: When shipping your ABS Module and Pump please ensure you package it properly. Place the module and pump together in a thick plastic bag to prevent fluid from leaking into the packaging. If the fluid leaks and saturates the box, this will cause the box to break and could cause delays or even possible loss of the module when shipping into our facility. Because the part is heavy, we recommend packaging with lots of protection (bubble wrap, packaging peanuts, etc) to avoid any movement in the box. Not following these instructions could result in additional fees, damages, or even loss of the part. It is the sole responsibility of the shipper if any of these events occur when sending the part to XeMODeX.

This is a Repair service of your existing module. You will need to remove and send your module to us for repair using the shipping labels provided to you.

The order will be processed during our regular business hours (Mon-Fri 8:30 – 5:00 EST). After processing your order, we will email shipping labels and shipping instructions. If you don’t see shipping labels within 1 hour of submitting your order (during business hours) please first check your junk/spam folders. If you still don’t see the labels, please contact us at 1-888-712-2525


Plug & Play: The software and settings will not be modified, making this module plug and play. No software reload or calibration is required after installation.

Quick Turnaround: Your module will be tested, repaired, tested again, and sent back to you in the same day (unless otherwise noted).

Non-Destructive Case Opening: A special press is used to separate the plastic ABS case. The factory seams are preserved. Once reassembled the module is fully sealed. No cut or oozing silicon.

Completely Reworked PCB: All internal circuit boards are tested at the component level. Any known prone-to-failure parts that are close to the maximum tolerance are automatically replaced.

Quality Tested: All our ABS modules undergo rigorous tests on our specialized custom-built CAN-bus driven testbed. All functions, DTCs, and software are checked and verified for proper operation.

Lifetime Limited Warranty: This module comes with our Lifetime Limited Warranty. Please see here for more information.

Reference Numbers

Reference Numbers

4L0614517D | 4L0614517A | 4L0614517D | 4L0614517E | 4L0614517 | 8J0-614-517-E-BEF | 8J0-614-517-B-BEF | 8J0-614-517-BEF | 8J0-614-517-D-BEF | 8J0-614-517-A-BEF

How This Service Works

How This Service Works

Step 1: Purchase our repair service online or over the phone.
Step 2: After processing your order, we will email you pre-paid shipping labels.
Step 3: Send us your old defective unit by dropping off the package to any UPS location, or call UPS to schedule a pick up.
Step 4: We will inspect and repair your old module.
Step 5: We will send you back the repaired module the same day (unless otherwise stated).
Step 6: You install the unit back into your vehicle.

For more detailed instructions, please see here.